Magnescale Co., Ltd. || DigitalGauge(R), Magnescale(R), Digital Gauge

HOME > Products > DigitalGauge > MG10/20/30

MG10/20/30DigitalGauge

MG10/20/30 DigitalGauge
  • Features
  • Specifications
  • Dimensions
  • Manual
  • Catalog

Features

Flexible digital gauge system for multi-point measuring.

  • Up to 64 connectable gauges
  • Input resolutions : 0.1μm, 0.5μm, 1μm, 5μm, and 10μm.
  • Compatible with RS-232C, BCD
  • Operating voltage : 12-24VDC
  • DIN rail mounting (35mm)

Specifications

MG10series Specifications

*1 Total power of modules connected to MG10 should not be over 54W (12VDC Input) or 108 W (24VDC Input).

MG10-P1MG10-P2
Power Power supply Power supply voltageDC12~24V(11~26.4V)Min. startup time: :100ms or less
Power consumption2.0W +total power consumption for connected modules*1
Imrush current(10ms )10Aor less(when maximum number of modules are connected)
Power supply reverse connection preventionFuse(5A fuse is built in.)
CommunicationI/F input/ output circuitRS‐ 232C(Conforms to EIA-232C)
Baud rate setting2400/9600/19200/38400 bps(set with DIP switch)
Data length7/8bit(set with DIP switch)
Stop bit1/2bit(set with DIP switch)
ParityNone/ODD/EVEN(set with DIP switch)
DelimiterCR/CR+LF(set with DIP switch)
Linkage functionMaximum number of linkagesmax.16(total of counter modules64)
Maximum length of linking cablemax.10m
I/O
Input formatsource input(+COM)sink input(-COM)
Photo coupler insulationDC 5~24V
Output formatsink type(-COM)source type(+COM )
Photo coupler insulationDC 5~24V
Input signalreset, pause, start, latching, and data out trigger to whole channels
Output signalintegrated alarm
Connectable modulesCounter modulesMG20-DK, MG20-DG, MG20-DT (available for mixed use, up to 16 modules)*1
Interface modulesMG30‐ B1, MG30‐B2*1
AccessoryLZ61: Link cable (1m)
MG20series Specifications

*2 Set the resolution value of the connected gauge.

*3 MG20-DG work only connect to DL**BR series

ModelMG20-DKMG20-DGMG20-DT
Power consumption1W+total power consumption for connected measuring units1.4W(when connected DG-B series)
0.5W(when connected DL-B series)
0.8W
Measuring unit inputConnectable measuring unitsDKseries(A/B quadrature input)DG**B series, DL**B/DL**BR seriesDT series
Allowable resolution setting*210/5/1/0.5/0.1μm10/5/0.5μm5μm(DT12/32)
1μm(DT512)
set with DIP switch
Maximum response speedSubject to the specification of the connected gauge1m/s
Maximum accelation speedSubject to the specification of the connected gauge2400m/s2
Reference point*3REF-LED (reference point loaded) shows on the display after the reference point is detected. Set "0" or preset value on the counter when the reference point is detected.-
OthersAlarmS-ALM LED activates by excess speed / acceleration of measuring unit.
C-ALM LED activates by excess speed of the internal circuit of counter.
Alarm display is cancelled by reset command from MG10 or with the reset button of main unit.
MG30series Specifications
ModelMG30-B1MG30-B2
Power consumption1W
I/OInput formatsource input(+COM)sink input(-COM)
Photo coupler insulationDC 5~24V
Output formatsink type(-COM)source type(+COM)
Photo coupler insulationDC 5~24V
Input signalDRQ / channel address / measuring mode shifting / comparator shifting / reset / start / posing / reference point loaded
Output signalBCD data (6 digits) / READY / code / GO/NO GO output / alarm / reference point loaded
Output settingtimer (1~128ms) / OUT / OR / polarity (set with internal DIP switch)
MGseries specifications

Magnescale reserves the right to change product specifications without prior notice.

Operating temperature/humidity0~+50℃(non condensing)
Storage temperature/humidity-10~+60℃(20~90%RH)

Dimensions

*Please contact our sales department.

Contact

Manual

Product nameJapaneseEnglishDeutschSimplified ChineseTraditional Chinese
MG10DownloadDownloadDownloadDownload
MG10SupplementDownloadDownloadDownload
MG10Supplement2DownloadDownloadDownload
MG20DownloadDownloadDownloadDownload
MG30DownloadDownloadDownloadDownload
MG30SupplementDownloadDownloadDownload
MG10/30CorrectionDownloadDownloadDownload

*Please contact us if you cannot download the file.

Contact

Catalog

MG10/20/30 SeriesJapaneseMG10/20/30 Catalog Japanese PDF
MG10/20/30 SeriesEnglishMG10/20/30 Catalog English PDF

*Please contact us if you cannot download the file.

Contact