Magnescale Co., Ltd. || DigitalGauge(R), Magnescale(R), Digital Gauge

HOME > Products > DigitalGauge > LT30

LT30DigitalGauge

LT30 DigitalGauge
  • Features
  • Specifications
  • Dimensions
  • Manual
  • Catalog

Features

Counter compatible with our compact, high-precision DK series of digital gauges

  • Maxmum display resolution : 0.1μm
  • Zero point detection
  • BCD and RS-232C I/O models are available.
  • Compact and lightweight: DIN standardsize (W 72mm x H 72mm)
  • Comparator
  • Reset/Preset
  • Alarm for exceeded maxresponse speed and disconnected measuring unit
  • Setting value storage
  • 2-axis ADD/SUB (2-axis model only)

Specifications

Specifications

*1 I/O connector Input : Reset, peak-hold start, peak-hold pause, RS trigger (RS-232C models only) Output : Result evaluation (photocoupler)

*2 BCD (36 pin half-pitch connector) Input : Reset, peak-hold start, comparator value selection (4 settings) Output : five digits (open collector)One of current value/maximum value/minimum value/peak-to-peakvalue selected and output. Alerm output

*3 RS-232C (8 pin mini-DIN connector) Reset, preset value setting/recall, peak-hold start, peak-hold pause

*4 RS-TRG pin Trigger input for RS-232C data output

*5 With measuring unit connected.

Magnescale reserves the right to change product specifications without prior notice.

ModelLT30-1GLT30-1GBLT30-1GCLT30-2GLT30-2GBLT30-2GC
Display6 digit backlit LCD, mode display
I/OMeasuring unit input1 CH2 CH
I/O connectors*1
BCD*2----
RS-232C*3----
RS-TRG*4----
Reset functionReset key or external input (I/O connectors)
--RS-232C command--RS-232C command
Preset functionPreset value set with preset key, recalled with reset key.
--Set or recalled with RS-232C command--Set or recalled with RS-232C command
Conparetor functionThree-level comparator Comparator value set with keys on the front panel. Result evaluation: LED and I/O connector output (photocoupler)
-Up to 4 values can be set for comparator (key input). Switched with BCD terminal.Set with RS-232C command-Up to 4 values can be set for comparator (key input). Switched with BCD terminal.Set with RS-232C command
Peak hold functionMaximum, minimum, and peak-to-peak values. Measuring started by the start input of the I/O connector; update stop by pause input.
--RS-232C can set or start.--RS-232C can set or start.
Input resolution0.0001 mm, 0.0005 mm, 0.001 mm, 0.005 mm, 0.01 mmselectable
Display resolution0.0001 mm, 0.0005 mm, 0.001 mm, 0.005 mm, 0.01 mmselectable
DirectionCan be switched
Reference point functionFunction use enabled/disabled can be selected (if use is enabled, the unit enters reference point signal input wait status at the same time as power-on).
Maximum response speed20 MHz (A/B phase difference)
Addition and subtraction function-A+B, A-B, B-A can be set with the direction setting.
AlarmSpeed over or measuring unit cable disconnected (Displayed on LCD or the I/O connector’s comparator outputs are all “H” (OFF).)
-BCD alarm terminal "H" (OFF)--BCD alarm terminal "H" (OFF)-
Data storageResolution, direction, comparator value, preset value, modes, etc.
-BCD sign, etc--BCD sign, etc-
key lock functionkey lock and release.
TemperatureOperating:0~40℃, Storage:-10~50℃
Power consumption*55 W5.5 W5 W8.5 W9 W8.5 W
Mass Approx. 200g Approx. 230g Approx. 220g Approx. 210g Approx. 270g Approx. 230g
Power supplyPower input connector (3 pins) : DC9.0-26.4 V
Compatible measuring unitDKseries

Dimensions

Product nameCommonJapaneseEnglish
LT301 Download
LT301B Download
LT301C Download
LT302 Download
LT302B Download
LT302C Download

*Please contact our sales department.

Contact

Manual

Product nameJapaneseEnglishDeutschSimplified ChineseTraditional Chinese
LT30 Download Download Download Download
LT30Supplement Download Download Download

*Please contact us if you cannot download the file.

Contact

Catalog

LT30 SeriesJapaneseLT30 Catalog Japanese PDF
LT30 SeriesEnglishLT30 Catalog English PDF

*Please contact us if you cannot download the file.

Contact