Magnescale Co., Ltd. || Magnescale(R), Magnescale(R), Digital Gauge

HOME > Products > Magnescale > LH70

LH70Magnescale

LH70 DigitalGauge
  • Features
  • Specifications
  • Dimensions
  • Manual
  • Catalog

MODEL LH70 IS FOR OVERSEAS AND NOT AVAILABLE IN JAPAN

Features

High performance counter for Mille and Lathe applications.

  • Counter for Milling machine and Lathe
  • Display Resolution Switching
  • Machine error compensation
  • Data Storage
  • Reset/Preset
  • Detecting Reference Point of Measurement Unit
  • Program function
  • Multi datum point
  • Milling function (Bolt hole circle / Easy R cutting / Line hole)
  • Lathe function (Tool coordinating / Adding function)

Specifications

Specifications
ModelLH70-1LH70-2LH70-3
Display7 digits and minus display
Connectable measuring unitGB-ER, PL20C (Direct) / DG-B (Necessary to use the conversion adaptor which is sold separately)
Measuring unit input resolutionStandard: 0.1 μm, 0.5 μm, 1 μm, 5 μm, 10 μm, 1 s, 10 s, 1 min, 10 min Expanded: 100 μm, 50 μm, 25 μm, 20 μm, 2 μm, 0.05 μm, 1 degree can be added
Display resolutionMeasuring unit input resolution or higher and diameter display (except for angle display)
Input signalA/B quadrature, Z phase (Conforms to EIA-422)
Minimum input phase difference100 ns
Quantization error±1 count
AlarmDisplayMeasuring unit disconnected, Excess speed, Maximum display amount exceeded, Power failure, Error in stored data
ResetResettable by key switch
PresetIt is possible to store/call 3 kinds of numbers.
Reference point detectionThe reference point of the measuring unit can be detected
Data storageThe value displayed before the power was turned off and setting values are stored
Linear compensationA fixed compensation is applied to the measuring unit's count value. Compensation amount Standard: ±600 um/m (Expanded: ±1000 um/m)
Segmented error compensationThe movement range of the measuring unit with a reference point can be divided into amaximum of 32 sections, and error compensation is performed for each of these sections. Compensation amount: ±600 um (at each section)
Program
  • Machining coordinates can be programmed (number of program steps: 850 max.)
  • 1. Manual programming by key switch
  • 2. Automatic programming by playback
  • 3. Mirror image during program execution
  • 4. A canned cycle (bolt hole
SleepThe display is turned off when no operations are made for a preset time. (The time can be set.)
Power supplyDC 12 V Rating 0.75 A Max. 1 A AC 100 V to 240 V ±10 % When using the AC adaptor PSC-22 (For U.S. only) or PSC-23 (For Europe and other countries) *Option
Power consumptionmax.32 VA (connected at the AC adaptor.)
OperatingTemperature0 ~ 40°C (non condensing)
Storage temperature-20 ~ 60°C (non condensing)
MassApprox. 1.5 kg
When the LH70 general-purpose applications or milling machine function are selected (General setting in the model type selection mode of the basic settings)
ModelLH70-1LH70-2LH70-3
Display1axis2axis3axis
Multi datum point10
Bolt hole circle-Displays coordinates for opening equidistant holes along the perimeter of a designated diameter
Simple R cutting-Display coordinates for simple R cutting
Line hole-Displays coordinates for opening equidistant holes along a designated straight line
Touch sensor1.Hold function, 2.Load function, 3.Centering
When the LH70 lathe function is selected (Lathe setting in the model type selection mode of the basic settings)

Magnescale reserves the right to change product specifications without prior notice.

ModelLH70-3
Display2-axis display (2-axis or 3-axis input)
Tool offset12
Measuring unit input addition22-axis addition display is available
Display holdThe displayed value can be held and the tool coordinate entered.

Dimensions

*Please contact our sales department.

Contact

Manual

Product nameJapaneseEnglishDeutschSimplified ChineseTraditional Chinese
LH70Instruction Manual Download Download Download

*Please contact us if you cannot download the file.

Contact

Catalog

LH70 SeriesEnglishLG20 Catalog English PDF

*Please contact us if you cannot download the file.

Contact